EliteEdge Professional Knife Sharpening System
- We pack ittoday
- The courier picks it up
- It reaches youDelivery in 4–6 working days
A constant angle, a factory-sharp edge
What the new version brings:
- Magnetic blade mount – the knife locks onto the base in seconds, with no clamps to scratch the blade
- Measurable, adjustable angle – read it, set it and repeat it exactly the next time you sharpen
- Three steps for blade width – for narrow knives and wide chef's knives
- Two sharpening modes – a V-edge at a fixed angle or a convex edge, like a katana
- Interchangeable stones – 400 to rebuild the edge, 1000 for routine sharpening
- Bamboo storage case – everything packs away in one place
For finishing and polish, add the E3 replacement stone set (3000, 6000 and leather).
How to use:
1. Place the blade on the base, where the magnet holds it, and set the angle you want.
2. Turn the knife so the stone works on one side of the edge.
3. Move the stone back and forth along the full length of the edge.
4. Flip the knife and repeat the same motion on the other side.
5. Move on to the next stone, from the lower grit to the higher one.
IMPORTANT: Keep your fingers away from the edge while sharpening. After use, wipe the stones and the guide and store the system in the bamboo case.
Specifications:
- Dimensions: 26 x 10 x 6 cm
- Weight: 1125 g
- Materials: bamboo, aluminium, stainless steel
- Stones included: 400 and 1000 grit
- Warranty: 2 years
Package contents: 1x EliteEdge sharpening system, 400 and 1000 grit stones, bamboo storage case, user manual
Why DACOBI?
Frequently asked questions
What does the 10-year warranty cover?
The 10-year warranty covers any defect arising from correct use of DACOBI knives or any manufacturing defects. All other products carry a 2-year warranty.
How do I care for DACOBI knives?
Depending on the steel used, DACOBI knives need different care. You'll find all the information you need to maintain your knife properly on each product page and inside your order.
Do DACOBI knives rust?
High-carbon steel blades can develop a patina if not cared for properly. A patina is a natural protective layer on carbon steel that shields the blade from further oxidation and gives it a hardened finish. It forms as the surface oxidises, and the process speeds up when the knife meets various acids. You can recognise a patina by its characteristic colours: first golden yellow, then deep blue, then violet, and finally grey that darkens over time. If you notice red rust spots, remove them.
How do I choose the right knife for me?
We're always available to help you choose the right knife — just email us and we'll find the one you need!
What can I do if I want to return a product?
It's simple — if the 30-day window hasn't passed since you received your order, you can review the return procedure here: Returns information
Which angle should I choose for my knives?
Most European kitchen knives are sharpened at around 20°. Japanese knives usually have a smaller angle, around 15°, and outdoor knives handle 20–25°.
What do I do when the stones wear out?
The stones are interchangeable. For finishing and polish you can add the E3 replacement stone set: 3000, 6000 and a leather plate.










